Today I found that model railway digital offering triple switches decoder for 10 €. Unfortunately, this too little information, so that almost everything must contact us by contact form . One learns not even know if the decoder follows the construction of Dr. King or not or whether he is for the C-track triple switches and the Central Station is intended 60212th At my personal request Mr. Marcinkowski replied quickly. Allow me to quote the most important thing here:
The decoder is built into the track bed. Connected to the middle
finish the points.
The drives are connected directly to the decoder.
Programming is via the Central Station. Go
as follows:
applying a pulse with the address XX
label three-way crossover Links
applying a pulse with the address XX +1
label three-way crossover mid
applying a pulse with the address XX + 2
label three-way crossover right
then press the push button of the switch
(no DIP switches)
The decoder expects the address links, symbolic links press
The decoder expects the address middle Symbolic center press
The decoder expects the address right, press right symbol
Finish.
The switch is also on the left, you want to drive but nch right
just press the button right, the decoder performs two commands
want both coil center and then right,
The advantage: you do not need to know as the initial state and can
with just one touch directly specify the desired direction.
0 comments:
Post a Comment